All Articles

When you’re deep in the backcountry, the last thing you want to find is that your tire iron doesn't fit your wheel. During my recent project—matching my Xventure trailer wheel upgrades to my Jeep Gladiator fleet—I discovered a safety issue that every Jeep owner needs to see.

A successful MetalCloak steering system install is about more than just beefy parts; it’s about restoring the steering geometry and eliminating the "cumulative slop" we’ve been researching. As we found with the upper control arms, every pivot point matters.

How deep into the rabbit hole are you willing to go to find a ticking sound? Is it better to ignore the noise and risk getting stranded, or do you tear it all down and pray you don't make things worse? This is my story of trying, failing, and opening a $162 can of worms that cost me more than just money.

If you are battling the dreaded front-end shimmy, a Dynatrac Ball Joint Install is often considered the "Nuclear Option" for a reason. Unlike standard factory units, these ProSteer heavy-duty joints are built to handle the added leverage of larger tires and off-road abuse. The beauty of this system is that they are rebuildable on the vehicle. Once you press them in this time, you’ll never have to use a ball joint press on those knuckles again.

If your steering wheel is shaking so hard it feels like a 7.0 on the Richter scale, you’re in the right place. While I am performing this build on my 2022 Jeep Gladiator Rubicon, the components and geometry principles involved in the "Nuclear Option" apply directly to:Jeep Gladiator (JT) * Jeep Wrangler (JL & JK) The Goal: Stop "guessing" with steering stabilizers and address the root cause by replacing weak, plastic-seated factory parts with heavy-duty, solid steel alternat

In the old days, power steering was easy: a belt, a pump, and some ATF. Today’s Jeeps use electro-hydraulic systems that generate massive heat, requiring specialized stuff like Pentosin CHF 11S. While the bottle says it’s a 'lifetime' fluid, I’m skeptical. I just had to top off both of my Jeeps because they were below the minimum mark. It begs the question—if this stuff is meant to last forever, where is it going?